Instructions For Installing Drivers for Rev. 3.0 USB Modules
(if you have an earlier module that does not have a"Rev. 3.0" sticker click here)
You can obtain the needed drivers for your Linx USB module from this webpage:
Scroll about half way down the page and find the drivers you are looking for. If you are obtaining the drivers for windows, make sure that you get the VCP drivers NOT the Direct Drivers. Instructions on installing the drivers can be found here. Make sure you follow the instructions for installing the VCP drivers. It will appear that you are doing the installation twice, but you really aren't. The first installation is for the USB module, the second is for the virtual com port. Note that the installation document also explains how to change the COM port designation to something other than the default. My experience is that if you change the COM port designation, you must reboot your computer before it becomes effective.
If you run into any problems, contact me by email, or post your question on the TNC-X newsgroup.